In this article, John Hallgarth, Founder and CTO of 3D Constructor, who is a BIM enthusiast and passionate about applying Virtual Design to Construction Practices, explores some practical ways for general contractors to approach BIM, some outside-the-box ideas, and some key opportunities not to be overlooked by commercial builders.
In this article, Stefano Della Torre, Director of the Department of Architecture, Built Environment and Construction Engineering at the Politecnico di Milano in Italy and a specialist in the field of restoration, shares his insights on the application of traditional BIM tools, which are primarily geared for new construction, to the historic preservation of our built cultural heritage.
In this Viewpoint article, Dennis Williams, an innovation enthusiast who writes and consults on how technology impacts B2B industries, looks at how emerging technologies such as the Internet of Things, data management, and augmented reality are shaping the future of BIM and can help the AEC industry to get the most out of it.
With rapid developments in 3D scanning technology over the past thirty years, reality capture is now faster and easier than ever, taking form in high definition terrestrial systems, aerial photogrammetry systems, handheld infrared systems, and everything in between. In this article, Tucker Cedarleaf of Cedar+Mac, who has been working with laser scanning equipment and software for over 10 years, debunks the assumptions many users make that all reality capture is equal and that it’s as simple as taking photographs. He shows how and why traditional laser scanning tied to survey control is the only method of 3D capture that produces baseline data of the quality and reliability required for AEC industry use.
In this Viewpoint article, Andy Knauf, Vice President of IT at Mead & Hunt, a top-ranked architecture and engineering firm, describes how his firm searched for and subsequently found and implemented an effective solution that would enable its multi-state workforce ¬– more than 525 employees in 30 active offices as well as numerous job site offices – around the US to share and access files and project information quickly and easily for improved project delivery.
This article by William Speakman, BIM Analyst at Caveo Consulting Engineers, describes how the firm has started utilizing 3D handheld scanning technology to document existing conditions, the advantages of this over traditional tripod based scanners, and the many benefits it has achieved with the specific solution it has adopted.
This Viewpoint article highlights the challenge of the project information explosion caused by the adoption of building information modeling (BIM) in the AEC industry and the importance of managing all this project information systematically to render order from chaos. When properly implemented, BIM is delivering tangible benefits to all project stakeholders, but AEC firms also need to adopt adjunct systems to manage BIM inputs and outputs in a way that helps them deliver on the promise of BIM.
This article by James Vandezande, Director of Design Technology at HOK, describes his experience attending the RTC Australasia event that was recently held in Gold Coast, Queensland. The Revit Technology Conference has grown since its inception in 2005 to a global event with conferences in Asia, North America and Europe in addition to the Australasia one. In addition to the highlights of the conference, James describes how the conference has grown beyond Revit but faces an identity crisis of sorts for various reasons. He also shares his thoughts on what makes RTC events so unique and successful.
This Viewpoint article by Lachmi Khemlani, Founder and Editor of AECbytes, questions why we still don’t have a smart building design tool which does not require us to painstakingly model every detail in our buildings, but can automatically create much of it from a conceptual sketch using a rule-based expert system. This is not as far-fetched or “out there” as it might seem—we already have a tool for infrastructure design that can automatically create structurally sound infrastructure components with minimal input from the user.
This article by Dr. Semiha Ergan, an Assistant Professor at New York University, Polytechnic School of Engineering in Civil and Urban Engineering Department, describes a recent project that she led with her student, Xue Yang, now a 360BIM consultant at Autodesk, to address the challenges HVAC mechanics face when troubleshooting HVAC related problems. They have developed a data schema that extends IFC and integrates as-built BIM, BAS (Building automation system), and CMMS (Computerized maintenance management system) data required for troubleshooting in a single repository which can be used by HVAC mechanics instead of going back and forth between FMS archives, command centers, and facility floors to get access to the facility/system specific information they need.